Industrial Design and Technology

LECTURER/SENIOR LECTURER IN ERGONOMICS (Contract position)

dintsig — Thu, 31 Jul 2025 09:21:12 +0000

LECTURER/SENIOR LECTURER IN ERGONOMICS (Contract position) dintsig Thu, 31/07/2025 - 11:21

Department/Faculty

Closing Date

Wed, 20 Aug. 2025

FACULTY OF ENGINEERING AND TECHNOLOGY
DEPARTMENT OF INDUSTRIAL DESIGN AND TECHNOLOGY

VACANCY NO. IRC 2704

Duties: The successful candidate will be expected to:(i) Teach undergraduate and graduate courses in Ergonomics in Product Design (e.g., Physical Ergonomics, Cognitive Ergonomics, Human Factors in Design) and related areas; (ii) Supervise both undergraduate and graduate student research projects; (iii) Conduct research in Ergonomics and also complement existing research activities in the area; (iv) Participate in other academic and professional activities of the department; (v) Render professional service, contribute to University Governance and Social Engagement, and carry out any other duties as may be assigned by the Head of Department.

Requirements:

Lecturer: Applicants should have: (i) A PhD in Ergonomics, Human Factors Engineering, Industrial Design (with a specialization in Ergonomics), or a related discipline; (ii) A Master’s Degree in Ergonomics, Human Factors Engineering, Industrial Design (with a specialization in Ergonomics), or a related field; (iii) A Bachelor’s Degree in Industrial Design, Design and Technology Education, Ergonomics, Human Factors Engineering, or a related field of at least 2.1 or equivalent (Second Class, First Division) or equivalent GPA (e.g., 3.6 on a 5-point scale); (iv) Show evidence of engagement in research; (v) Registered/or be eligible to register with ERB as a Professional Engineer. Teaching experience in Ergonomics at a University or equivalent, and evidence in Governance and Social Engagement will be added advantages. Industrial experience and/or professional certification in Ergonomics (e.g., CPE, C.Erg.) will also be an added advantage.

N.B. In special circumstances, a relevant Master’s degree in Ergonomics, Human Factors Engineering, Industrial Design (with a specialization in Ergonomics), or a related field with a Bachelor’s degree in Industrial Design, Design and Technology Education, Ergonomics, Human Factors Engineering, or a related field of at least 2.1 or equivalent (Second Class, First Division) or equivalent GPA (e.g., 3.6 on a 5-point scale) may be considered.

Senior Lecturer: Applicants should have: (i) A PhD in Ergonomics, Human Factors Engineering, Industrial Design (with a specialization in Ergonomics), or a related discipline; (ii) A Master’s Degree in Ergonomics, Human Factors Engineering, Industrial Design (with a
specialization in Ergonomics), or a related field; (iii) A Bachelor’s Degree in Industrial Design, Ergonomics, Human Factors Engineering, or a related field; (iv) At least 3 years teaching experience in Ergonomics or related areas at a university or comparable institution; (v) an excellent cumulative and sustained record of research and publications with at least 6 pieces of research products published by recognised publishers, 4 of which must be articles in refereed/accredited journals in internationally recognised indexing databases. The remaining 2 publications could be journal articles, book chapters, peer reviewed conference proceedings etc published by recognized publishers. An academic book may be equivalent to a maximum of 4 articles in refereed/accredited journals, depending on the quality and standing of the publisher; (vi) sustained research output: a minimum of 1 peer reviewed publication every 2 years; (vii) scholarly presentations at national and/or international conferences; (viii) lead and/or single author in at least 2 refereed journal articles; (ix) publications should be spread nationally and/or internationally and across journals; (x) some research impact, including but not limited to citations, the h-index, patents, policy applications, peer reviews, publications that are prescribed texts in other institutions etc. (required in at least 1 of the these); (xi) recognised as being of at least national research standing (e.g. reviewer for refereed/accredited national and regional publishers; Editorial board member of at least a national publisher in a relevant field; invitation as key note speaker at national and/or international conferences (required in at least 1 of the these) and (xii) evidence of governance and social engagement. (xiii) Evidence of research/academic leadership, research grants, programme development; (xiv) Register/or be eligible to register with ERB as a Professional Engineer.

The curriculum vitae (CV) should contain a detailed list of publications; clearly specifying titles of publications, dates published, name of publishers, name of co-authors if any, and evidence of indexing in recognized databases for journal articles. Publications should be categorized into: books, monographs, refereed journals, non-refereed journals, chapters in books, conference proceedings (specifying if peer-reviewed), etc. Candidates should also provide information on research grants, supervision, and other scholarly achievements.

Remuneration: The University offers a competitive salary and benefits commensurate with experience and qualifications. For more information on the University, please visit our website: www.ub.bw.

How to Apply: Letters of applications are to address the stated qualifications and provide any other information to assist the University to determine your suitability for the position. You should quote the vacancy number of the post applied for, provide current C.Vs (including telephone, telex and telefax numbers and e-mail), certified true copies of educational certificates, transcripts and names and addresses of three referees. Send your application to: The Human Resources Manager, Faculty of Engineering and Technology, 4844��Ѹ��, Private Bag UB 0061, Gaborone, Botswana. Telephone: (267) 355-4204; Fax (267) 3952309, E-mail: fetrecruitment@ub.ac.bw.

Applicants should inform their referees to (i) Quote the Vacancy Number(s) and Position(s) applied for and (ii) submit their references directly to the above address, before the stipulated closing date. Please note that applicants with incomplete information shall not be acknowledged.

Hand delivered applications should be submitted to Block 248, Office No. 255 (248/255).

NB: Only shortlisted applicants will be contacted.

Closing Date: 20th August 2025

PART-TIME AND/OR TEMPORARY FULL-TIME DEMONSTRATOR IN ADDITIVE MANUFACTURING

dintsig — Fri, 11 Jul 2025 06:01:52 +0000

PART-TIME AND/OR TEMPORARY FULL-TIME DEMONSTRATOR IN ADDITIVE MANUFACTURING dintsig Fri, 11/07/2025 - 08:01

Department/Faculty

Industrial Design and Technology

Closing Date

Thu, 17 Jul. 2025

FACULTY OF ENGINEERING AND TECHNOLOGY

DEPARTMENT OF INDUSTRIAL DESIGN AND TECHNOLOGY

VACANCY NO. IRC 2671

Applications are invited for a position of Demonstrators in the Department of Industrial Design and Technology, Faculty of Engineering and Technology.

Duties: The Department offers courses in the above area to the students of Bachelor of Design & Technology Education and Bachelor of Industrial Design programmes. Demonstrators are required to (i) instruct and demonstrate the practical aspects of these courses, (ii) mark students’ scripts and reports, (iii) perform any responsibilities as may be assigned by the Head of Department. Additive manufacturing includes: 3D printing, rapid prototyping, selective laser sintering, additive fabrication, computer-aided design and computer-aided Manufacture.

Requirements: Applicants must possess at least a bachelor’s degree in Design & Technology, Industrial Design, Product Design and/or any related field. Work experience, proficiency in SolidWorks, experience in Additive Manufacturing, and university level demonstration experience will be an added advantage.

Remuneration: The 4844��Ѹ�� offers a competitive salary and benefits commensurate with experience and qualifications as well as competitive hourly rate for Part-time services. For more information about the University visit our website: www.ub.bw.

How to Apply: Applicants are to address the stated qualification and provide other information to assist the University determine their suitability for the position. They should also quote the vacancy number of the post applied for, provide current CV’s (including telephone, telefax and email), certified copies of educational certificates and transcripts, names and addresses of three referees. Complete documentation should be sent to: The Human Resource Manager, Faculty of Engineering and Technology, Private Bag UB 0061, Gaborone, Botswana; Telephone: (267) 355 4204; E-mail: fetrecruitment@ub.ac.bw. Applicants should inform their referees to: (i) Quote the Vacancy number and position applied for and (ii) submit their references directly to the above address, before the stipulated closing date. Please note that applications with incomplete information shall not be processed.

Hand delivered applications should be submitted to Block 248, Office No. 205 (248/205).

NB: Only shortlisted candidates will be contacted.

Closing Date: 17th July 2025

PART-TIME AND/OR TEMPORARY FULL-TIME DEMONSTRATORS IN DESIGN MATERIALS AND PROCESSES (2 Positions)

dintsig — Fri, 11 Jul 2025 05:59:04 +0000

PART-TIME AND/OR TEMPORARY FULL-TIME DEMONSTRATORS IN DESIGN MATERIALS AND PROCESSES (2 Positions) dintsig Fri, 11/07/2025 - 07:59

Department/Faculty

Industrial Design and Technology

Closing Date

Thu, 17 Jul. 2025

FACULTY OF ENGINEERING AND TECHNOLOGY

DEPARTMENT OF INDUSTRIAL DESIGN AND TECHNOLOGY

VACANCY NO. IRC 2670

Applications are invited for a position of Demonstrators in the Department of Industrial Design and Technology, Faculty of Engineering and Technology.

Duties: The Department offers courses in the above area to the students of Bachelor of Design & Technology Education and Bachelor of Industrial Design programmes. Demonstrators are required to (i) instruct and demonstrate the practical aspects of these courses, (ii) mark students’ scripts and reports, (iii) perform any responsibilities as may be assigned by the Head of Department. Design Materials and Processes includes working with the following materials: metal, wood, polymers, other manufacturing materials and technologies for processing the materials.

Requirements: Applicants must possess at least a bachelor’s degree in Design & Technology, Industrial Design, Product Design and/or any related field. Work experience, proficiency in Manufacturing, prototyping processes with resistant materials and university level demonstration experience will be an added advantage.

Hand delivered applications should be submitted to Block 248, Office No. 205 (248/205).

NB: Only shortlisted candidates will be contacted.

Closing Date: 17th July 2025

PART-TIME AND/OR TEMPORARY FULL-TIME TEACHING ASSISTANT IN CERAMICS

dintsig — Fri, 11 Jul 2025 05:56:21 +0000

PART-TIME AND/OR TEMPORARY FULL-TIME TEACHING ASSISTANT IN CERAMICS dintsig Fri, 11/07/2025 - 07:56

Department/Faculty

Industrial Design and Technology

Closing Date

Thu, 17 Jul. 2025

FACULTY OF ENGINEERING AND TECHNOLOGY

DEPARTMENT OF INDUSTRIAL DESIGN AND TECHNOLOGY

VACANCY NO. IRC 2669

Applications are invited for a position of Teaching Assistant specialising in Ceramics in the Department of Industrial Design and Technology, Faculty of Engineering and Technology.

Duties: The successful candidate will be required to assist in the teaching of courses in the Bachelor of Design & Technology Education and Bachelor of Industrial Design programmes. The Teaching Assistant will primarily (i) instruct and demonstrate the practical aspects of Ceramics courses, (ii) mark students’ scripts and reports, (iii) perform any responsibilities as may be assigned by the Head of Department. Responsibilities will include guiding students on working with clay, hand building (e.g., coil and slab processes, mould making) and other forming techniques, decorative processes, and achieving proficiency in inventive ceramic techniques. Management and maintenance of the ceramics studio and equipment may also be required.

Requirements: Applicants must possess at least a Bachelor’s Degree in Design & Technology, Industrial Design, and/or any related field. Work experience, proficiency in a range of ceramic hand building and decorative techniques, knowledge of clay processes, kiln firing processes, and an understanding of both historical and contemporary ceramic design principles will be an added advantage. Experience in guiding students on product refinement and the production aspects of ceramics, as well as university level demonstration/teaching assistant experience, will also be beneficial.

Hand delivered applications should be submitted to Block 248, Office No. 205 (248/205).

NB: Only shortlisted candidates will be contacted.

Closing Date: 17th July 2025

PART-TIME AND/OR TEMPORARY FULL-TIME TEACHING ASSISTANT IN DESIGN COMMUNICATION

dintsig — Fri, 11 Jul 2025 05:53:35 +0000

PART-TIME AND/OR TEMPORARY FULL-TIME TEACHING ASSISTANT IN DESIGN COMMUNICATION dintsig Fri, 11/07/2025 - 07:53

Department/Faculty

Industrial Design and Technology

Closing Date

Thu, 17 Jul. 2025

FACULTY OF ENGINEERING AND TECHNOLOGY

DEPARTMENT OF INDUSTRIAL DESIGN AND TECHNOLOGY

VACANCY NO. IRC 2668

The 4844��Ѹ�� invites applications from suitably qualified persons for the positions of Teaching Assistants at the Faculty of Engineering and Technology for the 2025/2026 academic year.

Duties: The successful candidate will be required to assist in the teaching of courses in the Bachelor of Design & Technology Education and Bachelor of Industrial Design programmes. The Teaching Assistant will primarily (i) instruct and demonstrate the practical aspects of Design Communication courses (ii) mark students’ scripts and reports, (iii) perform any responsibilities as may be assigned by the Head of Department. Responsibilities will include working with creative processes, sketching, manual and digital rendering, basic model making, 2D graphics, animations etc.

Requirements: Applicants must possess at least a Bachelor’s Degree in Design & Technology, Industrial Design, Product Design and/or any related field. Work experience, proficiency in design communication (including creative processes, sketching, manual and digital rendering, model making, 2D graphics, animations), as well as university level demonstration/teaching assistant experience will be an added advantage. Applicants should be familiar with Adobe Creative Suite.

Hand delivered applications should be submitted to Block 248, Office No. 205 (248/205).

NB: Only shortlisted candidates will be contacted.

Closing Date: 17th July 2025

PART-TIME AND/OR TEMPORARY FULL-TIME TEACHING ASSISTANT IN DESIGN CONTROL TECHNOLOGY

dintsig — Fri, 11 Jul 2025 05:50:40 +0000

PART-TIME AND/OR TEMPORARY FULL-TIME TEACHING ASSISTANT IN DESIGN CONTROL TECHNOLOGY dintsig Fri, 11/07/2025 - 07:50

Department/Faculty

Industrial Design and Technology

Closing Date

Thu, 17 Jul. 2025

FACULTY OF ENGINEERING AND TECHNOLOGY

DEPARTMENT OF INDUSTRIAL DESIGN AND TECHNOLOGY

VACANCY NO. IRC 2667

The 4844��Ѹ�� invites applications from suitably qualified persons for the positions of Teaching Assistants at the Faculty of Engineering and Technology for the 2025/2026 academic year

Duties: The successful candidate will be required to assist in the teaching of courses in the Bachelor of Design & Technology Education and Bachelor of Industrial Design programmes. The Teaching Assistant will primarily (i) instruct and demonstrate the practical aspects of Design Control Technology courses (ii) mark students’ scripts and reports, (iii) perform any responsibilities as may be assigned by the Head of Department. Responsibilities will include working with electronics modelling software, knowledge of components, building circuits, electronic product design, electronics prototyping and management of an Electronics Lab for Design Control Technology.

Requirements: Applicants must possess at least a Bachelor’s Degree in Design & Technology, Industrial Design, Product Design and/or any related field. Work experience, proficiency in electronics product design (including electronics modelling software, components, circuit building, prototyping e.g. using microcontrollers such as Arduino or Raspberry Pi, and lab management), as well as university level demonstration/teaching assistant experience will be an added advantage.

Hand delivered applications should be submitted to Block 248, Office No. 205 (248/205).

NB: Only shortlisted candidates will be contacted.

Closing Date: 17th July 2025

PART-TIME AND/OR TEMPORARY FULL-TIME TEACHING ASSISTANTS (2 Semesters) Re-advertisement

mfetane — Fri, 26 Jul 2024 13:13:50 +0000

PART-TIME AND/OR TEMPORARY FULL-TIME TEACHING ASSISTANTS (2 Semesters) Re-advertisement mfetane Fri, 26/07/2024 - 15:13

Department/Faculty

Industrial Design and Technology

Closing Date

Mon, 12 Aug. 2024

FACULTY OF ENGINEERING AND TECHNOLOGY

DEPARTMENT OF INDUSTRIAL DESIGN AND TECHNOLOGY

VACANCY NO. IRC 1484

Applications are invited for Two (2) positions of Teaching Assistant in the Department of Industrial Design and Technology, Faculty of Engineering and Technology.

Duties: Successful candidates will be required to assist in the teaching of courses in the Bachelor of Design & Technology Education and Bachelor of Industrial Design programmes. Teaching Assistants are required to instruct and demonstrate the practical aspects and mark submissions of the practical work of Design Communication and Design Control Technology courses. Design Communication includes working with creative processes, sketching, manual and digital rendering, basic model making, 2D graphics, animations etc. Design Control Technology includes working with electronics modelling software, knowledge of components, building circuits, electronic product design, electronics prototyping and management of an Electronics Lab for Design Control Technology.

Requirements: Applicants must possess at least a Bachelor’s Degree in Design & Technology, Industrial Design, Product Design and/or any related field. Work experience, proficiency in design communication and electronics product design, as well as university level demonstration experience will be an added advantage. Preference will be given to current 4844��Ѹ�� Students in the Department of Industrial Design and Technology.

Remuneration: The University offers a competitive salary and benefits commensurate with experience and qualifications. For more information on the University, please visit our website; www.ub.bw

How to Apply: Applicants are to address the stated qualifications and provide any other information to assist the University determine their suitability for the position. They should quote the vacancy number of the post applied for; provide current CVs (including telephone, and e-mail), certified true copies of educational certificates, transcripts, and names, addresses and contact details of three referees to: The Human Resource Manager, Faculty of Engineering and Technology, 4844��Ѹ��, P/Bag UB0061, Gaborone, Botswana. Telephone (267) 355 4204; Fax (267) 3952309; E-mail: recruitmentfet@ub.ac.bw. Applicants should inform their referees to i) Quote the Vacancy Number(s) and Position(s) applied for and ii) Submit their references directly to the above address before the stipulated closing date. Please note that applications with incomplete information shall not be acknowledged.

Hand delivered applications should be submitted to Office No. 255, Block 248.

NB: Only shortlisted applicants will be contacted.

Closing Date: 12 August 2024

PART-TIME AND/OR TEMPORARY FULL-TIME TEACHING ASSISTANTS (2 Semesters)

mfetane — Fri, 14 Jun 2024 13:45:15 +0000

PART-TIME AND/OR TEMPORARY FULL-TIME TEACHING ASSISTANTS (2 Semesters) mfetane Fri, 14/06/2024 - 15:45

Department/Faculty

Industrial Design and Technology

Closing Date

Fri, 28 Jun. 2024

FACULTY OF ENGINEERING AND TECHNOLOGY

DEPARTMENT OF INDUSTRIAL DESIGN AND TECHNOLOGY

VACANCY NO. IRC 1484

Applications are invited for Two (2) positions of Teaching Assistant in the Department of Industrial Design and Technology, Faculty of Engineering and Technology.

Requirements: Applicants must possess at least a Bachelor’s Degree in Design & Technology, Industrial Design, Product Design and/or any related field. Work experience, proficiency in design communication and electronics product design, as well as university level demonstration experience will be an added advantage.

Remuneration: The University offers a competitive salary and benefits commensurate with experience and qualifications. For more information on the University, please visit our website; www.ub.bw

Hand delivered applications should be submitted to Office No. 255, Block 248.

NB: Only shortlisted applicants will be contacted.

Closing Date: 28 June 2024

PART-TIME AND/OR TEMPORARY FULL-TIME DEMONSTRATOR (2 Semesters) FOR DESIGN MATERIALS AND PROCESSES

mfetane — Fri, 14 Jun 2024 13:39:33 +0000

PART-TIME AND/OR TEMPORARY FULL-TIME DEMONSTRATOR (2 Semesters) FOR DESIGN MATERIALS AND PROCESSES mfetane Fri, 14/06/2024 - 15:39

Department/Faculty

Industrial Design and Technology

Closing Date

Fri, 28 Jun. 2024

FACULTY OF ENGINEERING AND TECHNOLOGY

DEPARTMENT OF INDUSTRIAL DESIGN AND TECHNOLOGY

VACANCY NO. IRC 1485

Applications are invited for the position of Demonstrator in the Department of Industrial Design and Technology, Faculty of Engineering and Technology.

Duties: The Department offers courses in the above area to the students of Bachelor of Design & Technology Education and Bachelor of Industrial Design programmes. Demonstrators are required to instruct and demonstrate the practical aspects of these courses. Design Materials and Processes include working with the following materials: metal, wood, polymers, other manufacturing materials and technologies for processing the materials.

Requirements: Applicants must possess at least a Bachelor’s Degree in Design & Technology, Industrial Design, Product Design and/or any related field. Work experience, proficiency in manufacturing and prototyping processes with resistant materials and university level demonstration experience will be an added advantage.

Remuneration: The University offers a competitive salary and benefits commensurate with experience and qualifications. For more information on the University, please visit our website; www.ub.bw

Hand delivered applications should be submitted to Office No. 255, Block 248.

NB: Only shortlisted applicants will be contacted.

Closing Date: 28 June 2024

PART-TIME AND/OR TEMPORARY FULL-TIME DEMONSTRATORS (2 semesters)

mfetane — Tue, 28 May 2024 08:38:22 +0000

PART-TIME AND/OR TEMPORARY FULL-TIME DEMONSTRATORS (2 semesters) mfetane Tue, 28/05/2024 - 10:38

Department/Faculty

Industrial Design and Technology

Closing Date

Thu, 13 Jun. 2024

FACULTY OF ENGINEERING AND TECHNOLOGY

DEPARTMENT OF INDUSTRIAL DESIGN AND TECHNOLOGY

PART-TIME AND/OR TEMPORARY FULL-TIME DEMONSTRATORS (2 semesters)

VACANCY N0: IRC 1421

AREA: Design Materials and Processes

Applications are invited for the position of Demonstrators in the Department of Industrial Design and Technology, Faculty of Engineering and Technology.

Duties: The Department offers courses in the above area to the students of Bachelor of Design & Technology Education and Bachelor of Industrial Design programmes. Demonstrators are required to instruct and demonstrate the practical aspects of these courses. Design Materials and Processes includes: working with the following materials: metal, wood, polymers, other manufacturing materials and technologies for processing the materials.

Requirements: Applicants must possess at least a bachelor’s degree in Design & Technology, Industrial Design, Product Design and/or any related field. Work experience, proficiency in Manufacturing and prototyping processes with resistant materials and university level demonstration experience will be an added advantage.

Remuneration: The University offers a competitive salary and benefits commensurate with experience and qualifications. For more information on the University, please visit our website; www.ub.bw

How to Apply: Letters of applicants are to address the stated qualifications and provide other information to assist the University determine your suitability for the position. You should quote the vacancy number of the post applied for, provide current CVs (including telephone, telex and telefax numbers and e-mail), certified true copies of educational certificates, transcripts, and names, addresses and contact details of three referees to: The Human Resource Manager, Faculty of Engineering and Technology, 4844��Ѹ��, P/Bag UB0061, Gaborone, Botswana. Telephone (267) 355 4204; Fax (267) 3952309; E-mail: recruitmentfet@ub.ac.bw. Hand delivered applications should be submitted to Office No. 255, Block 248. Applicants should inform their referees to i) Quote the Vacancy Number(s) and Position(s) applied for and ii) submit their references directly to the above address before the stipulated closing date. Please note that applications with incomplete information shall not be acknowledged.

NB: Only shortlisted applicants will be contacted.

Closing Date: 13 June 2024